CATALOGUE BY REQUEST
Outdoor WPC fence & gates
The P70 family brings privacy, half-open and open fencing together with matching gates and finishing pieces.
- Three fence layouts
- Two section heights
- Decorative inserts & lighting
TECHNICAL RESOURCES
The details behind
a better boundary.
Explore product essentials, compare fence profiles and plan your order. Request the complete catalogues below; our team will review your enquiry and share the right files personally.
THE COLLECTION GUIDES
Explore the systems. Request the details.
CATALOGUE BY REQUEST
Modular WPC fence collection
Architectural horizontal boards, aluminum framing and eight wood-look finishes for a considered boundary.
- Six modular configurations
- Nominal 6 ft sections
- Coordinating posts & gates
CATALOGUE BY REQUEST
Composite & ASA fence systems
Compare classic composite, sculpted Slat Wall, Super Kit, ASA and decorative carving fence systems.
- Privacy & slat-wall profiles
- System-specific finish palettes
- Posts, rails & gate options
SPECIFICATION ESSENTIALS
Start with the right system.
Board profile ≠ panel size
Profile dimensions describe the board cross-section. Usable coverage, post spacing and overall fence height depend on the complete assembly.
Choose compatible parts
Match boards, posts, rails, bases, caps and gates within the selected system. Similar finishes do not make components interchangeable.
Confirm the finish
Review a physical sample for color, grain and texture. Availability, quantities and product-specific documentation are confirmed with your quote.
AT A GLANCE
Fence profile reference.
All measurements below are in inches or feet. Converted dimensions are approximate.
| System / profile | Board profile | Collection |
|---|---|---|
| AM101 | ≈ 8.07 × 0.81 in | Modular WPC |
| AM60 + AM98 | ≈ 8.07 × 0.79 in + ≈ 3.54 × 0.79 in | Modular WPC |
| AM98 / GJ23 | ≈ 3.54 × 0.79 in | Modular WPC |
| GJ13 | ≈ 7.68 × 0.79 in | Modular WPC |
| P70 family | ≈ 3.54 × 0.89 / 4.72 × 1.00 / 6.06 × 0.89 / 7.20 × 1.00 in | Outdoor WPC |
| S-CF03 | ≈ 6.93 × 0.94 in | Slat Wall |
| S-CF05 | ≈ 8.07 × 0.94 in | Slat Wall |
| S-CF01 | ≈ 7.09 × 0.94 in | Super Kit / carving fence |
| S-CF02 | ≈ 3.54 × 0.94 in | Carving fence |
| AS-F01 | Upper ≈ 5.08 in / lower ≈ 3.15 in / thickness ≈ 0.94 in | ASA fence |
Dimensions in inches and feet are rounded conversions for reference. Confirm the selected profile, usable coverage, section dimensions, compatible components and current availability before ordering.
P70 sections are approximately 5 ft 10.9 in wide, with heights of 5 ft 10.9 in or 8 ft 2.4 in. Modular WPC uses nominal 6 ft sections; overall dimensions vary by configuration. Confirm final assembled dimensions before ordering.
PERSONAL SERVICE. THE RIGHT DETAILS.
Request your
catalogue.
Let us know what you are planning and which collection interests you. Our team will review your request and follow up with relevant product information.
Files are shared personally after review. No automatic downloads or catalogue emails.
2529 Royal Ln #235Dallas, TX 75229
FENCE PLANNING
Measure the project.
Specify the system.
List each straight run separately. Include corners, gates, height changes and the intended mounting surface.
Start with a layout
Show fence lengths, overall height, post locations and gate openings. Add a reference photo or drawing, and identify any changes in ground level.
Choose compatible parts
Select the board, post, rail, base and cap from the same compatible system. Different catalogue families use different profiles and connection details.
Confirm mounting & foundations
The modular WPC catalogue shows base-mounted and pre-buried post installations. The selected system’s instructions and project requirements determine fixings, footings, spacing and movement clearances.
Care & maintenance
Remove loose dirt, rinse with water and follow the selected product’s care sheet. Inspect posts, gate hardware and fastenings periodically. Confirm approved cleaning methods before using chemicals or pressure washing.
EARLY PLANNING
Estimate one straight fence run.
A quick section count to help prepare your enquiry. Final dimensions are confirmed for the chosen system.
Default planning width: 5.906 ft. Use the confirmed assembled section width for your chosen system.
11 sections
About 12 posts for one straight, uninterrupted run.
Planning estimate only. Rounds sections up. Gates, corners, slopes, post spacing and cuts can change the final order.
FREQUENTLY ASKED QUESTIONS
A few things
to know.
Do you sell retail?
Composite Fence Supply is focused on wholesale and distribution for contractors, dealers, builders and other trade buyers.
Are composite and WPC the same?
WPC means wood-plastic composite. It is one type of composite material. “Composite fencing” is a broader term, so check the specific product construction and system details.
What is ASA fencing?
ASA stands for acrylonitrile styrene acrylate. The supplied range includes the AS-F01 ASA fence panel. See the material guide and product page for the profile and finish options.
What are the minimum order and lead time?
Minimum quantities, current availability and lead times are confirmed for your selected products and order volume. Include your quantities and target date in the enquiry.
Can I request finish samples?
Yes. Use the wholesale enquiry form and choose Samples. Include the collection, profile and finishes you want to compare; sample availability and any costs are confirmed before proceeding.
Do you supply installation?
This business focuses on supplying fence products. Provide your installer’s specification or project layout so the appropriate system components can be quoted.
Can I mix parts from different fence ranges?
Do not assume components are interchangeable. Confirm compatibility for the selected board profile, post, rail, insert and gate configuration.
FOR CONTRACTORS, DEALERS & BUILDERS
Your next fence project.
Your wholesale supply partner.
Tell us your style, quantities and delivery destination. We’ll help define the right system for your order.